Ready-made Venetian blinds come in fixed sizes and sometimes need adjustment to fit perfectly. You should buy Venetian blinds longer than your window’s length. So, you can always shorten and adjust them according to your choice.
It’s important to adjust the blinds in the correct length and width because if the blinds are long after you have shortened them, it will ruin the overall look of the window.
Therefore, we bring you a DIY guide on how to shorten Venetian blinds. So you can easily adjust the blinds according to your window size.
Tools and Materials Required
Before, starting to shorten Venetian blinds, you must measure Venetian blinds for your window. However start by preparing some tools and materials beforehand. Here is what you might need:
- Measuring tape
- Pencil
- Scissor
- Screwdriver
- Cloth
- Safety specs
Once you have gathered all the tools and materials, prepare the workspace by clearing the floor a little. So you can work in a clean environment and not damage any other stuff in the room. That’s when you will need a cloth or towel to put it on the floor before starting the process.
How to Shorten Venetian Blinds? Step-By-Step Guide
Once, you have collected your tools, it’s time to get your hands on shortening Venetian blinds. So, perform the upcoming steps to measure horizontal Venetian blinds. Make sure to follow the instructions carefully to fit Venetian blinds perfectly in your windows.
Step 1: Install Venetian Blinds
Firstly, install Venetian blinds to check how many slats must be removed. Remember that the ideal length of Venetian blinds will leave a gap of ¼ inch between the blind and windowsill.
Step 2: Mark the New Bottom Slat
Secondly, the best way to measure the slats is by using a pencil. Make a mark on the cord where you want the length of the blind to end. Once shortened, the salt above the windowsill will be the bottom of the blind.
Moreover, leaving a little gap between the blind and windowsill to prevent clumping. So, it is better if you do it this way.
Step 3: Detach the Plugs
Hereafter, you will remove the Venetian blinds by detaching the plugs. These plugs are used to keep the slats in one place. You can find it as you lift venetian blinds. To shorten venetian blinds, you will have to remove these plugs first. To remove them, you may use a screwdriver as it is the easiest option.
Once you take all plugs out, place them on the one side, ensuring that you will not lose them as you will be using them again later.
Step 4: Trim the Cords
After removing the plugs, you will see a knot that is connecting the slats together in one place. You have to cut the cords above these knots so that you can remove the bottom of the blinds. Next, cut the cords again where you marked at the bottom slat earlier.
Step 5: Add the Plugs
Now you can attach the plugs you removed earlier. These plugs keep the knots neat and tidy. By using the scissor, cut the remaining strings under each knot, then finally slide each plug into the bottom rails.
Step 6: Check the Length
Before putting back the blinds, you can check the length first to ensure that it fits perfectly in your window. If there is a bit difference in the size you want, you can trim the cords a bit more easily after adding the plugs again.
Step 7: Shorten the Cords
Finally, it’s time to shorten your cords. This last step is necessary and sometimes people forget to do it. You have to trim the lift cords, depending on how much you have shortened venetian blinds.
Therefore, keeping the knots in place, re-tie them according to the length you want by sliding the beads up. Then you can trim the extra lift cords, this way you can successfully shorten the lift cords and get the venetian blinds ready in the size you want.
Final Thoughts
Venetian blinds are easy to shorten to your window size. With just a few materials, you can follow the steps mentioned above and get this process done by yourself at home. If you follow the instructions carefully, you can successfully get the desired result in the end.
However, mistakes like improper plugging and irregular cutting of cords can lead to bad results and might ruin the look of the window.
If you want to get this process done perfectly, contact us at pay weekly . Get the the best service for the installation of Venetian blinds as well as to shorten them.
FAQs
Are Venetian blinds easy to shorten?
Yes, with just a few simple steps, you can easily shorten Venetian blinds by following the proper instruction or with a professional help.
How to adjust the width of Venetian blinds?
Use a scissor or saw, remove some slats from the blinds and adjust the width of venetian blinds according to your window size.
What tools and materials are needed to shorten Venetian blinds?
You will need a scissor, measuring tape, cloth, screwdriver, and most importantly safety specs to protect your eyes from any damage.
How to cut Venetian blinds short from the top?
You can simply shorten them by using a sharp scissor and glue them back to the pocket after cutting them to the length you wanted.
